Data capture (MDC/SFDC)

All data
centrally stored!

Accepting challenges, Develop further
- Reaching for the sky.

MyXPert® Data capture

& your benefits!

MyXPert® ProductionManager

Datenerfassung - Alle Daten zentral gespeichert! Data capture MyXPert® ProductionManager To keep your systems running seamlessly, you need automatic data capture. The ProductionManager collects and processes this information. No more unnecessary time for manual data capturing.

MyXPert® ProductionPlanner

With ProductionPlanner, as a further additional module, you can obtain even more information about the Nominal/Actual states within production. Plan the sequence of your orders and deadlines by simply moving them visually from machine to machine and much more.

MyXPert® Monitoring

By means of an electronic signature, it is possible to record exactly when and where an activity is processed. In addition, this process also gives you better legal protection in the event of a downtime or incident.

«The manufacturing solution that supports you with your tasks and measures!»

Planning production

Collect real-time data

Monitor production

evaluate information

Plan

With up-to-date operating data, your processes can be controlled quickly and efficiently. Even beginners will quickly find their way around. Redundant entries and classic errors are avoided.

Record

Automatic monitoring of machines/plants and quantities generate reliable characteristic and planning figures. You receive up-to-date feedback from the machine.

Monitoring / Evaluation

An overview of nominal/actual comparison representations allows a process-reliable evaluation of quantities, running times, deadlines, maintenance, machines, test and measuring equipment, tools and much more..

More All-In-One solutions

Machine/Shop-Floor data capture (MDC/SFDC) methods

Operating data is defined at various points. All data, be it of people, machines or transport equipment, are recorded and passed on. The methods with which MDC/SFDC data can be recorded are also very extensive.

Manual recording

Time measurements such as the deployment of personnel or actions in the warehouse are recorded manually. Meter readings at production sites are noted. However, this is very error-prone and very slow. For this reason, manual recording only makes sense and is economical up to a certain amount of data.

Mechanical evaluation

Another method of recording is the mechanical determination of data. Typical examples are counters such as hour meters or odometers in vehicles. These mechanical methods also provide results as an intermediate step. These values must also be written down or digitally processed. As with the manual method, reading errors and thus loss of information can occur.

Digital Recording

When operating data is digitally recorded, the information is immediately displayed in binary form. The great advantage is the immediate availability of the data, which is essential for controlling the plant/machine and the production process. The factors "manual" and "mechanical" are excluded.

Networking with SCADA

Manual, mechanically displayed or digitally determined data must be brought to the places where they are needed for further analysis. This is mainly production control in addition to the economic efficiency calculation. In order to keep the data up-to-date, it is necessary to network the data acquisition points. Which method is chosen for data collection depends on many criteria. The most important criterion is the question of the existing or economic possibilities. Especially in a production environment, new machines can often be equipped with digital measurement technology at low cost. This greatly facilitates the use of MDC/SFDC data and increases quality.

Production / Production process Pyramid

screen tagTeamViewer