• +41 41 982 04 11
  • This email address is being protected from spambots. You need JavaScript enabled to view it.
  • Mo - Fr 08:00 - 17:00

milling and turning programming

Programming of turning-milling machines, turning and milling in one step.

SprutCAM for mill-turn: milling and turning programming in one software

SprutCAM for mill-turn is a complete multi-tasking CNC programming software for all-in-one machining in a single setup
Fräs-Drehbearbeitung in SprutCAM PDM

Turn-mill toolpath calculation in SprutCAM PDM

Workpiece and the machine scheme are considered while toolpath calculation in every operation

Optimisation of the CNC programming sequence with SprutCAM PDM

Our Cam Software calculates toolpath in the native kinematics of the CNC machine.

What does this mean to the user?

This means that toolpath calculation considers collisions between moving parts of the machine between themselves and with the workpiece and exits beyond the axis limits.

You do not need to postprocess the NC code to simulate the real-world result. All machine movements are visible immediately after the toolpath calculation.

CNC programming becomes visual, workflow is streamlined.

Optimized sequence of CNC programming

We can perform turning and milling toolpaths in any order. The workpiece for each next operation is the result of all the previous ones. You can see the current state of the workpiece at every moment.

In the screenshot, green is a part, and orange the result of all previous operations by this stage. At the same time it is a workpiece for the next operation.

All turning and milling toolpath strategies are suitable for mill-turn programming


C and Y axes support

Use C and Y for machining in the main spindle or counter-spindle, on the outer diameter and on the part face.

Play video

B-axis support

Index milling of the part in inclined planes and 5-axis machining using all machine axes.

Play video

Polar interpolation support

If the movement range along the Y-axis is very tight, or the Y-axis is absent, the polar interpolation option can be enabled in SprutCAM PDM.

Then the displacement along Y will be replaced by the C-axis.

Play video
Maxim Brauer - Chief Support Officer

Maxim Brauer - Chief Support Officer

« Since my basic mechanical training, I have been interested in the further development of production. The use of new technologies not only saves money, it also secures jobs and competitiveness. »
MySolutions Group
Zelglimatte 3
CH-6260 Reiden LU

Mon-Fri: 8:00 - 12:00 und 13:00 - 17:00
Sat-Sun: Closed

© 2021 MySolutions AG. All Rights Reserved.